← All products/Drainage/T-Drain PHD

T-Drain

T-Drain PHD

Drain from within. Stabilise from the inside out.

Prefabricated Horizontal Drain

Drainage

T-Drain PHD

Horizontal drain within embankments, slopes and retaining structures to discharge pore water.

What is T-Drain Horizontal Drain?

T-Drain Horizontal Drain is a prefabricated drainage band installed horizontally inside embankments, slopes, and retaining structures. While the T-Drain PVD accelerates consolidation by draining vertically upward through soft soil, the Horizontal Drain intercepts pore water moving laterally through an embankment body or slope — collecting it and directing it safely to the drainage outlet.

The product consists of the same proven T-Drain core and filter jacket used in the PVD system. The rigid core maintains continuous flow channels even under compression or bending loads, while the filter jacket allows water to enter freely while preventing fine soil particles from clogging the drain.

By removing excess pore water and reducing pore pressure within the embankment, T-Drain Horizontal Drain significantly improves slope stability, reduces the risk of internal erosion, and extends the service life of roads, embankments, and retaining structures built on or near soft ground.

Key features

  • Reduces Pore Water Pressure
    Intercepts excess pore water before it accumulates inside the embankment or slope body — reducing hydrostatic pressure that can trigger slope failure or structural damage.
  • Improves Slope Stability
    By maintaining lower pore pressure within the slope, the effective shear strength of the soil is increased — significantly improving the factor of safety against sliding and internal erosion.
  • Continuous Flow Under Load
    The rigid T-Drain core maintains uninterrupted drainage channels even when bent or compressed under embankment loads — ensuring consistent drainage performance over the full design life.
  • Fast & Simple Installation
    Supplied in rolls for rapid deployment. Installed horizontally in layers as the embankment is built — no specialist machinery required, minimising construction time and cost.

Specifications

PROPERTYVALUE
TypePrefabricated horizontal drainage band
CoreRigid channelled core — continuous flow under compression/bending
Filter jacketGeotextile filter — allows water in, retains fine soil particles
Width100 mm band
InstallationHorizontal layers within embankment or slope
ApplicationEmbankments, road shoulders, slopes, retaining walls

Applications

01Highway and toll road embankment drainage

02Slope drainage and stabilisation

03Retaining wall back-drainage

04Airport embankment and runway subgrade

05Railway embankment drainage

06Reclamation and port area works

Drainage

Enquire about this product