Tubosch
HDPE Fittings
Every bend, tee and reducer — fused.
HDPE fittings
HDPE Pipe
HDPE Fittings
Three types: PE 80/100 injection-moulded fittings (20–800 mm), fabricated fittings (110–1,200 mm) and PE 100 electrofusion fittings (20–315 mm).
- Material
- Molded HDPE
- Range
- 20 – 630 mm
- Types
- Elbow · tee · reducer · flange
- Jointing
- Butt / electrofusion
Complete the welded system.
Molded fittings keep a HDPE network monolithic: each elbow, tee and reducer is fused so there is nothing to corrode, loosen or leak. Flange adaptors transition cleanly to valves and equipment.
Indramas supplies the full fitting range and fuses them in line with the Tubosch pipe.
Key features
- Fully fusedBecomes one material with the pipe.
- Complete rangeElbows, tees, reducers, flange adaptors.
- Maintenance-free jointsNothing to re-torque or re-gasket.
- Clean transitionsFlange adaptors to valves and plant.
Specifications
| PROPERTY | VALUE |
|---|---|
| Material | PE 100 HDPE |
| Standard | ISO 4427 / EN 12201 |
| Types | Elbow, tee, reducer, flange adaptor |
| Joining method | Butt fusion / electrofusion |
| Pressure class | PN 10 – PN 16 |
Applications
01Pipeline junctions
Tees and branches in the network.
02Direction changes
Molded elbows of various angles.
03Diameter changes
Reducers between pipe sizes.
04Equipment tie-ins
Flange adaptors to valves and pumps.
Related products
HDPE PipeTuboschHDPE Pressure PipeHDPE PE 80/PE 100, 20–1,200 mm diameter, SDR 11–41 (ISO 4427, DIN 8074/8075, MS 1058). MDPE for gas up to 315 mm (ISO 4437). Lengths 6, 12, 50, 100 m. For potable water, industrial wastewater and gas.
HDPE/MDPE pressure pipeDetails →
HDPE PipeTuboschHDPE Drainage PipeFour types: Double Wall Corrugated Sewerage Pipe, Corrugated Drainage Pipe (perforated), Double Wall Cable Protection Pipe and Corrugated Pipe Fittings. For subdrains, French drains, wastewater and cable protection.
Corrugated HDPE pipeDetails →
HDPE Pipe